Oil & Break Line Making Supplies
We try to keep all information current, but regret that prices and availability are subject to change. Last updated 12/28/08.
| NORTON, 1/2" Oil Hose, Per Foot | 3 | - | NORTON, Oil Hose 8.7mm I/D, Per Foot | 0 | BO | Braided Line Covering, -4 Line, Black, (per foot) | 26 | - | Braided Line Covering, 3/8" Line, Black, per foot | 31 | - | Vacuum Tubing, 1/8" ID, Carb Drain Hose (Per foot) | 20 | - | Battery Drain Hose, 3/16" x 1/4", Clear, By Foot | 19 | - | Oil Hose, 3/8 ID, 300 PSI, Gates Lock-On, per foot | 26 | - | Oil Line, 1/2 ID, 250 PSI, Gates Lock-On, per foot | 32 | - | Vacuum Tubing, 3/16" ID, Gates (per foot) | 25 | - | Vacuum Tubing, 7/36" ID, (per foot) | 15 | - | Braided Steel Brake/Oil Line, -3, Hose (per ft) | 50 | - | Fitting, Braided Steel Brake Line, 45, 3/8x24F | 13 | - | Fitting, Braided Steel Brake Line, 90, 3/8x24F | 7 | - | Fitting, Brake Line, Straight, 3/8x24F | 15 | - | Fitting, Brake Line Three Way Tee, 3/8x24x24x24M | 4 | - | Fitting, Brake Line Three Way Tee, 3/8x24x24Mx24F | 2 | - | Fitting, Master Cyl. to Brake Line, 3/8x24x26 M | 10 | - | Fitting, Magura Master Cyl.-Brake Line 3/8x24&26M | 3 | - | Fitting, AP Lookheed Caliper-Brake Line 3/8x24x24M | 16 | - | Fitting, Commando Caliper, With O-Ring, 3/8x24 M/M | 10 | - | Fitting, Brake Line, Short End/Mstr. Cyl. 3/8x24M | 62 | - | Fitting, Brake Line, Long End/Flange, 3/8x24M | 56 | - | Fitting, Banjo, Master Cylinder to Brake Line | 4 | D | Fitting, Banjo Bolt & Washers, 3/8 x 24 | 21 | - | Fitting, Banjo Bolt & Washers, M10 x 1, Metric | 14 | - | Braided Steel Oil Hose, -6, 5/16" ID, (per ft) | 50 | - | Fitting, End Clamp for Braided Oil Line 5/16" ID | 15 | - | Braided Steel Oil Line, -10 1/2" ID, (per ft) | 20 | - | Fitting, End Clamp for Braided Oil Line 1/2" ID | 14 | - | Brake Switch, Banjo Bolt, Washers, M10 x 1, Metric | 5 | - | Brake Switch, Banjo Bolt & Washers, 3/8 x 24 | 3 | - | Braided Steel Oil Line, -4, Clear Cover, (per ft) | 0 | D | Ferrule for Braided Steel Oil Line, -4 | 16 | D | "T" for Braided Steel Oil Line, -4 | 6 | - | Braided Steel Oil Hose, -5, 1/4" ID, (per ft) | 24 | - | Braided Steel Oil Hose, -7, 3/8" ID, (per ft) | 49 | - | Fitting, End Clamp for Braided Oil Line 3/8" ID | 37 | - | Fitting, End Clamp for Braided Oil Line 11/16" ID | 8 | - | Fitting, End Clamp for Braided Oil Line 1/2" ID | 31 | - | Fitting, End Clamp for Braided Oil Line 1/2" ID | 0 | OO | Fitting, Crimp Ring for Reusable Fittings | 20 | - | Fitting, Braided Rocker Feed to Gauge, Brass | 5 | - | Fitting, Braided Rocker Feed to Gauge, Male End | 4 | - | Grommet, Brake Line Front Fork | 13 | - | Banjo, Rocker Feed, -3, 20 Deg, Chrome | 120 | - | Banjo, Rocker Feed, -3, Straight, Chrome | 50 | - | Single Domed Banjo Bolt, Rocker Feed, -3, Chrome | 78 | - | Double Domed Banjo Bolt, Rocker Feed, -3, Chrome | 41 | - | Banjo Bolt Copper Washer, Rocker Feed, -3 | 279 | - | Banjo, Rocker Feed, -3, 20 Deg, Stainless | 10 | - | Banjo, Rocker Feed, -3, Straight, Stainless | 11 | - | Single Domed Banjo Bolt, Rocker Feed, -3, Stainless | 16 | - | Double Domed Banjo Bolt, Rocker Feed, -3, Stainless | 23 | - | Rocker Feed Line, 13", R.Head to L.Head, Chrome | 8 | - | Rocker Feed Line 15 1/4", L.Head to Gauge, Chrome | 1 | - | Rocker Feed Line, 25.5" T.Cover to R.Head, Chrome | 8 | - | Rocker Feed Line, 13", R.Head to L.Head, Stainless | 4 | - | Rocker Feed Line 15 1/4", L.Head to Gauge, Stainle | 2 | - | Rocker Feed Line 25.5" T.Cover to R.Head Stainless | 4 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information