We try to keep all information current, but regret that prices and availability are subject to change. Last updated 12/28/08.
Please Note: the "13-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 13-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
| Washer, 7/16 Flat | 21 | - | Decal, Oilbath | 6 | - | Rear Frame Grommet, 13/16" x 1", W Harness | 11 | - | Decal, OIL RECOMMENDATIONS, 1971-72 | 4 | - | Horn | 0 | BO | Horn 12v, 2.75" Chrome | 1 | - | Horn 12v, 2.75" Chrome | 2 | - | Horn Brackets, Set of 2, USED, Powder Coat, Black | 1 | U | Horn, 12v, Economy, Italy | 2 | - | Side Stand Pivot Pin | 2 | - | Circlip | 4 | - | Grommet, MK3 | 16 | - | NORTON Decal, 4 3/8", Fastback Tail Section,transf | 5 | - | Decal, MADE IN ENGLAND | 6 | - | Washer, Flat | 8 | - | Washer, Flat, USED | 3 | U | Bolt, 3/8 x 24, 2", Shock Mount, Plated | 8 | - | Short Bolt, 3/8 x 24, 1 1/2", Shock Mount, Plated | 0 | SO | Bolt, 3/8 x 24, 2", Shock Mount, Stainless | 2 | - | Bolt, 3/8 x 24, Shock abs.mt., USED | 0 | U | Center Stand, Early 750, Frame Mounted | 0 | NA | Center Stand, Early 750, Frame Mounted, USED | 0 | U | Spacer, 5/8OD, 7/16ID, 1/2L | 6 | - | Hex Bolt, 7/16 x 20, 1 1/4", Plated, Grade 8 | 14 | - | Hex Bolt, 7/16 x 20, 1 1/4", Plated, Grade 5 | 60 | - | Hex Nut, 7/16 x 20, Lock, Plated | 47 | - | Hex Nut, 7/16 x 20, Lock, Stainless | 42 | - | Hex Head Bolt, 1/4 x 28, 1", Plated | 108 | - | Side Stand, Pre 71 Commando, Frame Mounted | 0 | NA | Side Stand, Pre 71 Commando, Frame Mounted, USED | 0 | U | Spring, Early Side Stand | 3 | - | Hex Head Bolt, 3/8 x 24, 1 1/4", Plated | 92 | - | Bolt, 3/8 x 24, USED | 19 | U | Oiler Outlet, Rear Chain | 2 | - | Bracket, Reflector | 0 | BO | Decal, DO NOT OVERFILL O-TANK | 2 | - | Spring, Early Center Stand | 2 | - | Decal, Black Gold Trim, 6", transfer | 8 | - | Decal, 750 Commando, Fastback Tail Section | 4 | - | Screw, 1/4 x 20 | 5 | - | Grommet, Fiberglass Covers | 12 | - | ID Plate, 750 | 6 | - | ID Plate Rivet | 24 | - | Decal, ROADSTER Blk/Gold Trim, 5 1/2" - T | 3 | - | Spacer, Centerstand, 5/8OD, 7/16ID, 5/16L | 9 | - | Side Stand, 71 Commando | 0 | NA | Side Stand, 71 Commando, USED | 0 | U | Rubber Cover, Ign.sw, Front & Rear (2 pc) | 6 | - | Sidepanel, LH Fastback, 71on, Fiberglass, Tool Box | 0 | NA | Sidepanel, LH Fastback, Fiberglass, Tool Box,USED | 1 | U | Screw, 10 x 24, 2" | 15 | - | Blade | 0 | NA | Spring, Center Stand, 71 and 72 | 4 | - | Spring, Side Stand, 1971 | 4 | - | Bracket, Ignition Coils | 2 | - | Bracket, Ignition Coils, USED | 2 | U | Side Stand Spring | 6 | - | Side Stand Spacer, Pre MK3 .625 O.D. | 2 | - | Grommet, Steel Sidepanels | 14 | - | ID Plate, 72 750, 73 850 & MK3 | 5 | - | Rubber Buffer, Side Stand | 6 | - | Sidepanel, Roadster, LH, 1971-74, Tool Box, Steel | 0 | NA | Sidepanel, Roadster, LH, Tool Box, Steel, USED | 2 | U | Sidepanel, RH 71on, Steel | 0 | NA | Sidepanel, RH 71on, Steel, USED | 2 | U | Oil Tank Level Decal | 5 | - | Decal, BREAK-IN PERIOD | 4 | - | Decal, GAS RECOMMENDATIONS | 3 | - | Decal, OIL RECOMMENDATIONS, 1973/74 | 8 | - | Center Stand, Late 750 & 850, Plate Mount | 2 | - | Center Stand, Late 750 & 850, Used | 0 | U | Spacer, Stepped Centrestand | 8 | - | Grommet, Tail Lamp Wire | 6 | - | Rubber Pad, Rear Mudguard Mount | 5 | - | Spring Center Stand, 73 and Later | 6 | - | Screw, 1/4 x 20 Philip Head | 8 | - | Gearbox Top Bolt Nut, 9/16 x 18 | 9 | - | Center Stand Kit, Fits 71 to 75 Commandos | 3 | - | Rubber Cover, Ign.sw, Rear | 6 | - | Rubber Cover, Ign.sw, Front | 6 | - | Decal, SHORT STROKE | 4 | - | Bolt, 7/16 x 20 Side Stand (High Tensile) | 5 | - | Side Stand MK3, Works for 72 on with Space | 2 | - | Side Stand, 72 on Commando, USED | 0 | U | Side Stand Spacer for MK3 or New .687" OD | 7 | - | Screw, 1/4 x 20 Philip Head | 6 | - | Decal, GEARSHIFT PATTERN | 4 | - | Side Stand Kit, 72-75 Commando, Complete | 2 | - | Clip, Consol Lamps | 12 | - | Washer, 5/16, Flat, Thick | 30 | - | Washer, 5/16, Flat, Thick, Stainless | 44 | - | Decal, OIL RECOMMENDATIONS, NVT | 4 | - | Rubber Washer | 4 | - | Grommet, Left Rear Zener Wire, MK3 | 9 | - | Grommet, 3/8 x 1/2 x 1/16 | 14 | - | Bolt, 2BA | 15 | - | Screw, 1/4 x 28 | 9 | - | Nut, 7/16 x 20, Thin | 10 | - | Hex Nut, 7/16 x 20 Lock, Thin, Plated | 48 | - | Bolt, 5/16 x 18, 7/8", Thin Head, Plated | 5 | - | Hex Head Bolt, 5/16 x 18, 7/8" Thin Head Stainless | 4 | - | Bolt, 5/16 x 18, USED | 4 | U | Gaiters, Pre 1971, Each | 4 | - | Decal, NORTON/TRIUMPH, Made in England | 5 | - | Patent Plate, Red | 7 | - | Nut, 1/4 x 26, Plain | 14 | - | Decal Set, Eight Transfers | 1 | - | Powder Coating Blanking Hardware Kit, MK3 | 4 | - | Pre-MK3 Eng/Mount Blanking Plate Set (4 plates) | 1 | - | Powder Coating Blanking Hardware Kit, Pre-MK3 | 1 | - | Washer | 10 | - | Washer, USED | 4 | U | Alum. Washer 3/8" | 39 | - | Washer, USED | 3 | U | Washer, Spring | 6 | - | Allen Bolt, 1/4 x 20, 5/8", Stainless Steel | 73 | - | Decal, MADE IN ENGLAND, Script Transfer | 6 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information