We try to keep all information current, but regret that prices and availability are subject to change. Last updated 12/28/08.
Please Note: the "12-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 12-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
| 34T Drive Pulley for Belt Drive, 40mm | 1 | SO | 32T Drive Pulley for Belt Drive, 40mm | 0 | SO | PowerGrip HTD Primary Drive Belt, 40mm 960 | 2 | - | PowerGrip HTD Primary Drive Belt, 30mm 960 | 1 | - | 34T Drive Pulley for Belt Drive, 30mm | 0 | SO | Belt Drive, 32T Drive Pulley Complete, 30mm | 1 | SO | Belt Drive, 32T Drive Pulley only, 30mm | 0 | SO | Belt Drive, Inner Plate for 32T Drive Pully | 0 | SO | Belt Drive, Outer Plate for 32T Drive Pully | 0 | SO | Belt Drive Clutch Basket | 0 | SO | Belt Drive Clutch Basket, Basket Only | 0 | SO | Belt Drive Clutch Basket, Backing Plate | 0 | SO | Starter Ring Gear, Belt Drive Clutch Basket | 0 | SO | Commando Belt Drive Kit, 30mm, 32Tx68T, Old Britts | 2 | - | Clutch Operating Ball, 1/2" (12.7mm) | 14 | - | Clutch Operating Ball, USED | 13 | U | Pushrod, Clutch Release | 2 | - | Pushrod, Clutch Release, USED | 0 | U | Clutch Stud-to-Center Nut, Pre-Commando | 5 | - | Spring, Clutch, Pre-Commando | 9 | - | Screw, 1/2 x 20, Clutch Adj, Pre-Commando | 2 | - | Clutch Center, Atlas | 1 | - | Alloy Clutch Center, Atlas Shaft, Commando Clutch | 0 | D | Atlas Clutch Rubbers, Large | 6 | - | Atlas Clutch Rubbers, Small | 6 | - | Cup, Clutch Spring, Pre-Commando | 9 | - | Nut, Clutch Spring, Pre-Commando | 9 | - | Stud, Clutch Spring, Pre-Commando | 5 | - | Nut, Clutch Adj., 1/2 x 20 | 10 | - | Nut, Clutch Adj., USED | 1 | U | 750 Clutch Complete, 1968 - 1970 | 0 | OO | Pressure Plate, 750 (4 plate clutch) | 2 | - | Pressure Plate, 750, USED | 4 | - | Commando Drive Plate, .080" Thick, Each | 9 | - | Commando Drive Plate, .060" Thick, Each | 18 | - | Commando Drive Plate, .065" Thick, Each | 19 | - | Commando Drive Plate, .070" Thick, Each | 14 | - | Commando Drive Plate, .075" Thick, Each | 13 | - | Commando Drive Plate, Barnett, .078 Thick, Each | 9 | - | Commando Drive Plate Assortment | 9 | - | Washer, Cupped, Clutch Locating | 4 | - | Washer, Cupped, Clutch Locating, USED | 0 | U | Clutch Plate, (Fiber Inserts), 750, Each | 8 | - | Drive Pin, Back Plate (Not Available) | 0 | NA | Spring, Diaphram, Commando | 2 | - | Spring, Diaphram, Comm. cl., USED | 0 | U | Washer, Clutch Shim, .036 | 14 | - | Washer, Clutch Shim, .036, USED | 0 | U | Washer, Clutch Shim, .048 | 16 | - | Washer, Clutch Shim, .048, USED | 0 | U | Screw, 1/2 x 20, Clutch Adj | 5 | - | Screw, 1/2x20, Clutch Adj, USED | 1 | U | Solid Fibre Clutch Plate, 750, Each | 8 | - | 750 Clutch Complete, 1971 - 1973 | 0 | OO | Clutch Drum with Back Plate, Commando, 57T | 1 | - | Clutch Drum, Commando, USED | 3 | U | Back Plate, Clutch | 2 | - | Back Plate, Clutch, USED | 0 | U | Rivet - Clutch Back Plate | 9 | - | 850 Clutch Plate, Sintered Bronze, Each | 10 | - | Pressure Plate, 850 (5 plate clutch) | 2 | - | Pressure Plate, 850, USED | 0 | U | Clutch Center, 750 and 850 Commando | 0 | BO | Alloy Clutch Center, 750 and 850 Commando | 0 | SO | Clutch Center, 750 and 850, USED | 0 | U | Clutch Complete, all 850s | 0 | OO | Clutch Kit, Barnett, 750 Commando, 4 Plate | 13 | - | Clutch Kit, Barnett, 850 Commando, 5 Plate | 11 | - | Clutch Kit, Barnett, Atlas, P11, 5 1/2 Plates | 1 | - | Drive Plate, Barnett, Atlas, P11, Plain | 23 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information