We try to keep all information current, but regret that prices and availability are subject to change. Last updated 12/28/08.
Please Note: the "12-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 12-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
| Layshaft 1st Gear Bush | 4 | - | Layshaft 3rd Gear Bush | 4 | - | Bush, 2nd Main | 3 | - | Bush, Gearbox Housing, OD=.627 ID=.5 L=.88 | 6 | - | Bush, Gearbox Housing, UnderSized, Machine in Case | 6 | - | Gear Shaft Inner Bush | 5 | - | Bush, Gearbox, 4th Main (Sleeve Gear) | 8 | - | Bush, Shift, Outer Gbx.cov. | 3 | - | Stud, 5/16x22x26TPI, Long Stud | 8 | - | Stud, 5/16x22x26TPI, Long Stud, USED | 6 | U | Bearing, Ball, LH Mainshaft | 4 | - | Bearing, Ball, LH Mainshaft, One Side Sealed | 9 | - | Bearing, Ball, RH Mainshaft | 6 | - | Ball Bearing, Wheel, (Use 06-7710 for Layshaft) | 8 | - | Sealed Ball Bearing, Wheel | 25 | - | Countershaft Sprocket Spacer | 3 | - | Countershaft Sprocket Spacer, USED | 0 | U | Bush, Right Hand Layshaft | 4 | - | Bush, Kick, Outer | 2 | - | Bush, Kickstart, Inner Cover | 2 | - | Bearing, Ball, Clutch Sprocket Backplate | 3 | - | Sealed Bearing, Ball, Clutch Sprocket Backplate | 8 | - | Bush, Gearbox Cover, MK3 | 4 | - | Bush, Shift Quadrant, MK3 | 3 | - | Superblend Roller Bearing, Layshaft | 8 | - | Bearing Kit, Gearbox Commando | 6 | - | Bearing, Belt Drive Tensioner | 9 | - | Bushing Kit, Gearbox Commando, Pre-MK3 | 2 | - | Bushing Kit, Gearbox Commando, MK3 | 2 | - | Outrigger bearing | 10 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information