We try to keep all information current, but regret that prices and availability are subject to change. Last updated 01/27/12.
Please Note: the "11-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 11-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
| Contact Breaker Cover | 2 | - | Contact Breaker Cover Clip | 2 | - | Contact Breaker Drive Sprocket | 0 | BO | O-Ring, Points, Atlas Type | 3 | - | Oilseal, Crank, Right Side | 10 | - | Oil Seal Circlip | 6 | - | Oil Seal Circlip, USED | 6 | U | Hex Nut, 3/8 x 24, Lock, Stainless | 80 | - | Timing Cover, Engine | 0 | NA | Timing Cover, Engine, USED | 0 | U | Gear/Sprocket, Idler, With Bush | 2 | - | Gear/Sprocket, Idler, USED | 1 | U | Shaft, Intermediate Gear | 2 | - | Shaft, Intermediate Gear, USED | 0 | U | NORTON Bush Intermediate Gear, Ream to .5627-.5620 | 9 | - | Sprocket, Camshaft, 18T | 2 | - | Points Cover | 2 | - | Points Cover, USED | 0 | U | Sleeve, Rubber, Points Wire | 6 | - | Slipper, Camchain, No Rubber Face, USED | 0 | U | Points Cover Screw, 2BA | 12 | - | Points Cover Screw, 2BA, USED | 6 | U | O-Ring, Tach Drive, Pre 75 | 14 | - | Junction Block, Oil Line | 2 | - | Junction Block, Oil Line, USED | 0 | U | Key, Oilpump Drive Gear | 5 | - | Key, Oilpump Drive Gear, USED | 2 | U | Stud, 5/16 x 18 x 24 | 6 | - | Stud, 5/16x18x24, USED | 6 | U | TimingCover/Crankcase Screw 1/4 x 20 1 1/4 | 6 | - | TimingCover Screw, 1/4x20, Long, USED | 13 | U | Timing Cover Screw, 1/4 x 20, 1 1/8" Long | 10 | - | Timing Cover Screw, 1/4x20, Medium, USED | 11 | U | Timing Cover Screw, 1/4 x 20, 1" Long | 16 | - | Timing Cover Screw, 1/4x20, Short, USED | 14 | U | Crankcase Bolt, Short, 5/16 x 24, 1 3/8" | 8 | - | Oil Pump Complete | 2 | - | Oil Pump Complete, Rebuilt | 0 | U | Oilseal, Points | 10 | - | Slipper, Camchain, Rubber Face | 4 | - | Clip, Rocker Feed Pipe | 2 | - | Screw, Timing Cover | 10 | - | Inspection Cap, MK3 Timing Cover | 4 | - | Inspection Cap, MK3 Timing Cover, USED | 3 | U | O-Ring, Insp. Cover, MK3 Timing Cover | 12 | - | Washer, Sealing, Mk3 Oilpump | 11 | - | Body Assembly, Pressure Relief Valve | 2 | - | Body Assembly, Pressure Relief Valve, USED | 0 | U | Spring, Checkvalve, Mk3 | 3 | - | Plunger, Checkvalve, Mk3 | 3 | - | Stud, 5/16 | 4 | - | Washer, Sealing, Oil Pump | 14 | - | Washer, Cupped, Crank Bearing | 4 | - | Pressure Relief Valve Piston | 2 | - | Pressure Relief Valve Piston, USED | 2 | U | Washer, Relief Valve, Nut | 11 | - | Washer, Relief Valve, Nut, USED | 2 | U | Washer, Relief Valve, Union | 10 | - | Cap, Pressure Relief Valve | 2 | - | Cap, Pressure Relief Valve, Stainless | 4 | - | Cap, Pressure Relief Valve, USED | 7 | U | Spring, Pressure Release Valve | 3 | - | Spring, Pressure Release Valve, USED | 5 | U | Washer, 9/16, Flat | 3 | - | Gasket, Magneto to Case | 0 | OO | Slipper, Camchain, Pre 71 | 3 | - | Slipper, Camchain, Pre 71, USED | 3 | U | Plate, Camchain Adjuster, Thin | 5 | - | Plate, Camchain Adjuster, Thick | 4 | - | Plate, Camchain Adjuster, Thin, USED | 1 | U | Oil Pump Stud | 20 | - | Screw, 1/4 x 20, Timing Cover Short | 12 | - | Washer, Shim, Pressure Relief Valve | 26 | - | Washer, Shim, Pressure Relief Valve, USED | 0 | U | Screw, Oilpump Body | 10 | - | Feed Bush, Oil Pump, MK3 & Eariler Upgrade | 2 | - | Key, Oilpump, Pre 72 | 4 | - | Chain, Camshaft, .375, 38 Pitches, Single | 2 | - | Circlip, Intermediate Shaft | 6 | - | Grommet, Points Wire, Early | 0 | NA | Sprocket | 0 | BO | Spacer, Oil Pump Sealing Washer | 8 | - | Spacer, Oil Pump Sealing Washer, USED | 0 | U | Dowel, Hollow, Oil Junction Block | 4 | - | Screw, 1/4 x 20, Timing Cover Long, Early | 10 | - | Gear, Oilpump Worm, 6 Start | 3 | - | Gear, Oilpump Worm, 6 Start, USED | 0 | U | Gear, Oilpump Driven | 2 | - | Gear, Oilpump Driven, USED | 1 | U | Nut, 3/8 x 24, Lock, Thin | 20 | - | Nut, 3/8 x 24, Lock, USED | 0 | U | Timing Cover Badge | 6 | - | Nut, 5/16 x 26, Small Hex, Early | 6 | - | Fiber Washer for Magneto Fixing Bolt | 0 | NA | Chain, Ignition/Magneto, 42 Pitches, Singl | 8 | - | Magneto Fixing Bolt, 1/4 x 26 | 2 | - | Intermediate Gear C/W Bush | 0 | NA | Magneto Fixing Stud, 5/16 x 26 x 18 | 3 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information