To order electronically: click on the Order button for the part you want to place in your shopping cart. In order for this to work your browser must use frames and you must start at the Old Britts Home Page.
Alternative Parts: If there is a Yes in the Alt column, click on the Yes to see the alternative parts.
| Ref No. | Part No. | Description | Qty. Req. | Qty. on Hand | Status | Price | Alt |
| 1 | 750/850 Commando Frame, Engine Mounted Center Stan | ||||||
| 2 | ID Plate, 72 750, 73 850 & MK3 | ||||||
| 3 | ID Plate Rivet | ||||||
| 4 | Decal, OIL RECOMMENDATIONS, 1971-72 | ||||||
| 5 | Dzus Fastener, Sidepanel | ||||||
| 6 | Circlip, Dzus Fastener | ||||||
| 7 | Bracket, Top, Side Panel | ||||||
| 8 | Hex Head Bolt, 1/4 x 28, 1/2", Plated | ||||||
| 9 | Washer, 1/4" Flat, Plated | ||||||
| 10 | Hex Nut 1/4 x 28, Plated | ||||||
| 11 | Cupped Washer | ||||||
| 12 | Commando Seat Knob | ||||||
| 13 | Pin, Dowel, Split, Seat Knob | ||||||
| 14 | Swinging Arm, 750/850 Pre-MK3, Gussetted | ||||||
| 15 | Dustcover, Swingarm, Commando | ||||||
| 16 | Bush, Swingarm, 1 1/2" Long, Pre-MK2A | ||||||
| 17 | O-Ring, Commando Swingarm, Large | ||||||
| 18 | O-Ring, Swingarm | ||||||
| 19 | Bolt, 5/16 x 24, Chain Adjuster, Pre-MK3 | ||||||
| 20 | Hex Nut, 5/16 x 24, Plated | ||||||
| 21 | Swingarm Pivot Spindle, Pre-MK2A, .8745" OD | ||||||
| 22 | Hex Head Bolt, 1/4 x 28, 1/2", Plated | ||||||
| 23 | Washer, 1/4" Flat, Plated | ||||||
| 24 | End Cap, Swingarm, Left Hand | ||||||
| 25 | End Cap, Swingarm, Right Hand | ||||||
| 26 | Rod, Threaded | ||||||
| 27 | Washer, Copper | ||||||
| 28 | Nipple, Lubrication, 1/4 x 28 | ||||||
| 29 | Commando Shock, Hagon, 110 lbs., 13", Set | ||||||
| 30 | Not Available | 2 | - | NA | 0 | No | |
| 31 | Not Available | 2 | - | NA | 0 | No | |
| 32 | SPRING RETAINING COLLET | 4 | - | NA | 0 | No | |
| 33 | Stud, Seat & Shock Mount | ||||||
| 34 | Washer, 3/8, Flat, Plated | ||||||
| 35 | Hex Nut, 3/8 x 24, Plated | ||||||
| 36 | Bolt, 3/8 x 24, 2", Shock Mount, Plated | ||||||
| 37 | Washer | ||||||
| 38 | Alum. Washer 3/8" | ||||||
| 39 | Hex Nut, 3/8 x 24, Plated | ||||||
| 40 | Side Stand MK3, Works for 72 on with Space | ||||||
| 41 | Side Stand Spacer, Pre MK3 .625 O.D. | ||||||
| 42 | Side Stand Spring | ||||||
| 43 | Hex Nut, 7/16 x 20 Lock, Thin, Plated | ||||||
| 44 | Washer, 7/16 Flat | ||||||
| 45 | Washer, Spring | ||||||
| 46 | Bolt, 7/16 x 20 Side Stand (High Tensile) | ||||||
| 47 | Rubber Buffer, Side Stand | ||||||
| 48 | Chainguard, Chrome, Commando 1971-73 | ||||||
| 49 | Hex Head Bolt, 1/4 x 28, 1 3/4", Plated | ||||||
| 50 | Washer, 1/4" Flat, Plated | ||||||
| 51 | Hex Nut 1/4 x 28, Plated | ||||||
| NOT ILL | Steering Damper Kit, Commando | ||||||
| NOT ILL | Pre-MK3 Swinging Arm Rebuild Kit |
NOTE: * Use this spacer only with original stand.
NOTE: ! Use 06-5491 if ordering a new stand.
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information