Old Britts

Handlebars

The prices are current as of 07/14/21.

Handlebars

This first picture shows several bars together and illustrates the different bar heights. From the top down they are:

  1. The factory Norton Hirider bar (06-2599, $0.00) and measures W 33", H 12.5", PB 5.5".
  2. The factory Norton US bar (06-1046, $46.00) and measures W 31", H 5", PB 7.5".
  3. The factory Norton UK bar (06-4132, $52.95) and measures W 31", H 2", PB 6".
  4. The Vincent Straight Bar (70-200007, $0.00) and measures , W 26 1/4", H 0", PB 3". This bar weighs 1 lb 8.1 oz. This bar also comes in black chrome (70-200008, $0.00)
  5. The Clubman Drop Bar (70-200006, $0.00) and measures , W 25.5", H -4", PB 5.5". This bar weighs 1 lb 13.2 oz. This bar also comes in black chrome (70-200005, $0.00)
  6. The 35mm Clipons made in England (70-200014, DROPPED) is 9.5" long (measured from the end to the center of the fork bracket) and weighs 1 lb 15.4 oz a set.
  7. The 35mm Magura Clipons (70-200015, $0.00) is 10.5" long (measured from the end to the center of the fork bracket) and weighs 1 lb 13.7 oz a set.

All our bars are listed with the following measurements: W for end to end width, H for height from triple clamp to top of bar, and PB for pull back from mounting. The following pictures show how we measure the bars:

 Handlebars The W (for width) is measured from bar end to bar end.


 Handlebars The H (for height) is measured from the clamping surface (triple clamp) to the top of the bar.


 Handlebars The PB (for pull back) is measured from the front of the bar (where it is clamped to the triple clamp) to the end of the bar.


Return to Old Britts home page ….. Our Products, Ordering

Accessories

This page was written and designed by F. H. Eaton & Associates if you have any questions or comments please contact us at eaton@oldbritts.com