Old Britts

Braided Brake Line/Fittings for Norton Master Cylinder

All prices are current as of 02/12/18.

This series of pictures show the braided steel brake line fittings that can be adapted to the standard Norton Master Cylinder. These fittings can be adapted to other Master Cylinders. Give us a call and we will help you with your fittings.

Fittings These two pictures show the banjo fitting (banjo, part # 54-800116, DROPPED) and (3/8 x 24 bolt, part # 54-800117, $12.50) or for metric master cylinders (10 x 1mm bolt, part # 54-800118, $8.77) The banjo bolts comes with two sealing washers. This fitting sticks out from the cylinder 3/4" and down 1 5/8". Fittings

Fittings These two pictures show the straight fitting (part #54-800104, straight fitting, $11.00) the (part # 54-800111, Adapter fitting, $6.70) and (part # 06-7522, Sealing washer, $0.21) This fitting sticks out 1 3/4". Fittings

Fittings These two pictures show the 45 degree fitting (part # 54-800102, 45 degree fitting, $19.00) the (part # 54-800111, Adapter fitting, $6.70) and (06-7522, Sealing washer, $0.21) This fitting sticks out 2 3/8" and down 1". Fittings

Fittings These two pictures show the 90 degree fitting (part # 54-800103, 90 degree fitting, $16.67) the (part # 54-800111, Adapter fitting, $6.70) and (part # 06-7522, Sealing washer, $0.21) This fitting sticks out 1 3/8" and down 1 1/2". Fittings

Fittings This last picture shows what a fitting looks like when fitted to the end of the braided line (part # 54-800101, $6.00)

You can read a technical article on Making up Braided Oil and Brake Lines on our Technical Article page.


Return to Old Britts home page ….. Our Products, Ordering

Oil and Break Line Making Supplies

This page was written and designed by F. H. Eaton & Associates if you have any questions or comments please contact us at eaton@oldbritts.com