Remove outer primary cover, release clutch adjustment locknut and remove threaded clutch adjuster. Screw center bolt of tool into spring center until well engaged. Tighten nut just under bolt head until the spring is free to turn, Do not over tighten this nut or the spring may be damaged. Peel the circlip from the groove around the outside of the spring and lift out the spring. Unless the spring is to be replaced shortly, release the tension of the withdrawal tool.
Norton Factory Tools .Accessories, Tools
This page was written and designed by F. H. Eaton
& Associates if you have any questions or comments please
contact us at firstname.lastname@example.org